Page Summary
Active Entries
- 1: around the world in 80 beers episode 212: Summer Pale Ale
- 2: Around The World in 80 Beers Episode 210: 4 Pines Nitro Stout
- 3: Around The World In 80 Beers Episode 208:Nun Launcher Pale Ale
- 4: Hark! A blog post!
- 5: Around The World In 80 Beers Episode 204: Longstocking Autumn Ale
- 6: Around The World In 80 Beers Episode 205: Black Horn Dark Ale
- 7: Around the world in 80 beers episode 204: Longstocking Amber Ale
- 8: Shoulder injection #2
- 9: Around the World in 80 Beers Episode 201: Longstocking Dark Ale
- 10: More banging on about the shoulder
Style Credit
- Base style: Leftovers by
- Theme: Elegant Brown by
Expand Cut Tags
No cut tags
no subject
Date: 11 Sep 2007 07:40 (UTC)Geektopia idea
Date: 11 Sep 2007 13:14 (UTC)If Romans, and millers of the 16th and 17th centuries, could move water from source to where it was needed using stone and concrete, a bunch of geeks in the 21st century can. Canals and aqueducts would be the best way to move large amounts of water to where it is needed (ie water wheels, hydro stations) and require the least amount of exotic material (pipes etc.) You'd still use pipes to bridge gullies. The canal would only need to be 1m wide x 1m deep at most, but the volume of water it would move is huge.
Water wheels, water turbines, electric motors, internal combustion engines, steam engines and a horse chained to a windlass and walking in circles ALL provide rotational energy.
Re: Geektopia idea
Date: 11 Sep 2007 13:58 (UTC)Also, I read online somewhere about a guy who built a vertical axis water turbine that used a whirlpool like vortex affect... the drop on that was about 2 meters, and the 'chute' was only a metre deep by a couple wide I think. [the feed pool sorta looked like a cutaway diagram of a turbo]...
He got a constant 30 kilowatts off it. Which is enough for couple of houses.
So, imagine an aqueduct a meter deep by say 3 meters wide, and a couple of kilometers of long, feeding water from the lake in a spiraling circle around the island... and every 50 meters or so, a meter wide chute leading to a header pool and a vertical drop through one of those turbines, with pipe and cable feeds off to different houses [sorta a ring and spokes almost].
Water and power distribution, all in one go.
and since you'd need a continuous flow to keep the turbines spinning, you could do that by diverting some of the water to the house via a filtration and sterilization system as drinking water, the rest could flow under it, and out the other side into a contentiously cycling reed bed system, into which the black water waste empties. creating a waste management system. Which, come to think of it.. could also incorporate hydroponic farming as well. [why waste nutrients growing reeds, when you can grow crops instead?]
Viola! Complete start to finish water/waste/power system.
Re: Geektopia idea
Date: 12 Sep 2007 10:16 (UTC)If you build it properly, what you get is a long, very narrow lake that only flows when water is taken out at one end. It could be kept full by weirs across small rivers, very much like the canals in England. (see Horseshoe Falls in Llangollan)
Individual homesteads would have a small penstock (say 50mm to 80mm ABS pipe) running from the canal to the house, where a small Pelton hydro generator (http://www.rpc.com.au/pdf/hyd-200.pdf) would supply power, and the fall from the canal would give the house pressurized raw water.
In areas with a concentration of houses, multiple large (>100mm ABS pipe) penstocks could feed a large Pelton hydro station (http://en.wikipedia.org/wiki/Pelton_wheel) to generate bulk power. Hydro stations are a constant drain on the water supply, so a load monitoring system would shut down most of the penstocks in the big station, leaving just enough open to keep it "idling" during times of low load (eg at night)
By the way: Septic systems (http://www.biomax.com.au/products.htm) suitable to irrigation.
Re: Geektopia idea
Date: 12 Sep 2007 13:46 (UTC)I suspect that what will happen is a at first we'd deploy pre-built PV solar arrays, then build smaller applications like that one in the pdf file [if only because it's easily shipped out.] like you said, followed by a home built larger central pelton design utilising local materials. [in the story there's this mothballed airfield complete with an aircraft boneyard.] The final step in the story version of course would be to expand the pre-existing geo-thermal steam turbines.
I like the idea of tying the septic and irrigation systems together though.
Re: Geektopia idea
Date: 13 Sep 2007 07:23 (UTC)Re: Geektopia idea
Date: 13 Sep 2007 08:15 (UTC)and yet, there's all this tech we already have that if applied the right way, could do the job.
Mind you, a zero-point energy system would be nice too!
Re: Geektopia idea
Date: 13 Sep 2007 09:44 (UTC)no subject
Date: 11 Sep 2007 11:17 (UTC)In return, here is one of the Cannes Lions 2007, along a similar vein:
http://www.canneslionslive.com/film/win_1_1.htm
no subject
Date: 11 Sep 2007 12:36 (UTC)And I fix mah own snacks!
Added to favorites:D.
no subject
Date: 11 Sep 2007 14:31 (UTC)